| ||||||
Buy
Dayton 12 Inch MKII Titanic Subwoofer
The 12" Titanic MKII will work in both a sealed and vented enclosure. One possible home theater design is a 3 cubic foot vented box tuned to 22Hz. This design produces clean, accurate bass to 25Hz. At maximum power (400 watts) it will produce 115dB while remaining linear below 20Hz! For music applications, we recommend a 2 cubic foot sealed box with 50% fill. With a Q alignment of 0.69 this design will produce clean detailed bass. At full power it will produce 115dB while never exceeding Xmax!
Dayton 12 Inch MKII Titanic Subwoofer Features and Specifications
- Cast Frame
- Composite Fiber Cone
- Santoprene Rubber Surround
- Ventus Cooling System
- Flat Progressive Spider
- Power handling: 350 watts RMS/ 490 watts max.
- Voice coil diameter: 2"
- Voice coil inductance: 1.91 mH
- Nominal impedance: 4 ohms
- DC resistance: 3.03 ohms
- Frequency response: 22-500 Hz
- Magnet weight: 108 oz.
- Fs: 22.18 Hz
- SPL: 91.3 dB 2.83V/1m
- Vas: 4.46 cu. ft.
- Qms: 9.56
- Qes: .43
- Qts: .41
- Xmax: 18.9 mm
- Sd: 77.7 sq.in.
- Net weight: 20 lbs.
Click here to bookmark this page
Do you have a question? Click here to ask at deCAF: Car Audio Forum!